Thank you for expressing interest in Northrop Grumman Systems Corporation part number A51B92311-11, which is listed with the NSN 5310000085708. You have reached the Request for Quote (RFQ) page for part number A51B92311-11, where we encourage you to submit the form provided below with pertinent details on your requirements. Within 15 minutes of our staff receiving and reviewing your completed form, you will be contacted by a team member for consultation on your options. Our quotes are tailored in accordance with the unique specifications of each customer, even going so far as to accommodate pressing time constraints and other specialized needs where possible. If you would like to discuss details with our staff to receive consultation on potential solutions, please give us a call or email using the contact information on this website. We are available around the clock and always happy to assist however we can.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
As an ASAP Semiconductor platform, part number A51B92311-11 and all other listings falling under the Nuts and Washers category of products on this website are sourced, managed, and shipped in accordance with rigorous quality-assurance practices. This includes stocking components from vetted manufacturers, subjecting all to document verification and warehouse inspections, and carrying out testing and other procedures as necessary. We also uphold a strict NO CHINA SOURCING pledge, which means that each purchased part from our website will come delivered alongside any applicable qualifying certifications or manufacturing trace documentation. As a result, customers can procure this item and other Round Plain Nut offerings with peace of mind. Experience unrivaled fulfillment today when you submit the RFQ form on this page.
| -- | DEMIL: | No |
| -- | FIIG: | A021A0 |
| -- | IMM: | KZ |
| -- | INC: | 15887 |
| -- | NATO Stock Number: | 5310-00-008-5708 |
| -- | NIIN: | 000085708 |
| -- | Shelf Life: | N/A |
| -- | UOM: | -- |
| AAJD | Thread Class: | 3b |
| AAJF | Thread Direction: | Right-hand |
| ABPH | Small End Diameter: | 2.428 inches |
| ABQU | Drive Point Depth: | 0.091 inches |
| ACTA | Nut Style: | Round |
| ACTD | Nut Diameter: | 2.682 inches |
| ADBG | Nut Thickness: | 0.740 inches |
| ADBH | Drive Point Width: | 0.250 inches |
| ADBJ | Undercut Thickness: | 0.240 inches |
| ADBM | Drive Point Quantity: | 4 |
| AGGP | Drilled Hole Diameter: | 0.062 inches |
| ALET | Hole Type And Quantity: | 2 drilled |
| BZRR | Thread Series: | Un |
| CMLP | Thread Quantity Per Inch: | 16 |
| CQJX | Nominal Thread Size: | 2.000 inches |
| CRHC | Hole Configuration Style: | Configuration f |
| CRSQ | Countersink Angle: | 90.0 degrees nut |
| MATT | Material: | Iron alloy 660 |
| MDCL | Material Document And Classification: | Ams 5737 assn std single material response |
| TEST | Test Data Document: | 81349-mil-i-6866 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Semiconductor’s Certifications and Memberships
If You’d Ever Like to Get A Response to Your RFQ form for Aerospace Parts Within Fifteen Minutes Or Less, Simply Fill Out the form On Our Homepage.
Request for Quote
