Thank you for expressing interest in United Technologies Corporation part number 204016, which is listed with the NSN 5340003964913. You have reached the Request for Quote (RFQ) page for part number 204016, where we encourage you to submit the form provided below with pertinent details on your requirements. Within 15 minutes of our staff receiving and reviewing your completed form, you will be contacted by a team member for consultation on your options. Our quotes are tailored in accordance with the unique specifications of each customer, even going so far as to accommodate pressing time constraints and other specialized needs where possible. If you would like to discuss details with our staff to receive consultation on potential solutions, please give us a call or email using the contact information on this website. We are available around the clock and always happy to assist however we can.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
As an ASAP Semiconductor platform, part number 204016 and all other listings falling under the Commercial Hardware category of products on this website are sourced, managed, and shipped in accordance with rigorous quality-assurance practices. This includes stocking components from vetted manufacturers, subjecting all to document verification and warehouse inspections, and carrying out testing and other procedures as necessary. We also uphold a strict NO CHINA SOURCING pledge, which means that each purchased part from our website will come delivered alongside any applicable qualifying certifications or manufacturing trace documentation. As a result, customers can procure this item and other Angle Bracket offerings with peace of mind. Experience unrivaled fulfillment today when you submit the RFQ form on this page.
| -- | DEMIL: | No |
| -- | FIIG: | A042A0 |
| -- | Hazmat: | Yes |
| -- | IMM: | KZ |
| -- | INC: | 16900 |
| -- | NATO Stock Number: | 5340-00-396-4913 |
| -- | NIIN: | 003964913 |
| -- | Shelf Life: | N/A |
| -- | UOM: | 5 EA |
| ACHY | Mounting Hole Type: | Plain |
| ADLK | First Leg Length: | Between 0.800 inches and 0.820 inches |
| ADLL | Second Leg Length: | Between 2.340 inches and 2.360 inches |
| AGAV | End Application: | Eng j-57 |
| AHLF | Second Leg Width: | Between 0.550 inches and 0.570 inches |
| AHLG | Second Leg Corner Radius: | Between 0.297 inches and 0.328 inches |
| AHLH | Second Leg End Width: | Between 1.590 inches and 1.610 inches |
| AHLL | First Leg Slot Length: | Between 0.340 inches and 0.360 inches |
| AHLM | First Leg Slot Width: | Between 0.216 inches and 0.226 inches |
| AHLN | Second Leg Hole Diameter: | Between 0.339 inches and 0.349 inches |
| AHLP | Second Leg Distance Between Hole Centers Along Width: | 0.979 inches |
| AHLV | Second Leg Distance From Edge To Hole Center Along Width: | Between 0.297 inches and 0.328 inches |
| AHLW | Second Leg Distance From Edge To Hole Center Along Length: | Between 0.297 inches and 0.328 inches |
| AHPW | First Leg Thickness: | Between 0.056 inches and 0.068 inches |
| AHPX | Second Leg Thickness: | Between 0.056 inches and 0.068 inches |
| AHQN | First Leg Width: | 0.560 inches |
| AHRA | First Leg Distance From Edge To Hole Center Along Width: | 0.280 inches |
| AHRB | First Leg Distance From Edge To Hole Center Along Length: | 0.280 inches |
| AJFP | First Leg End Radius: | 0.280 inches |
| AJZU | First Leg Style: | End radius |
| AKAU | First Leg Hole Arrangement Style: | One slot |
| AKBU | Second Leg Style: | Radius foot |
| AKCU | Second Leg Hole Arrangement Style: | Two holes |
| CSSP | Second Leg Relationship To First Leg: | Not identical |
| CSSQ | First Leg Angle: | 90.0 degrees |
| MATT | Material: | Steel comp 410 |
| MDCL | Material Specification: | Ams 5504 assn standard single material response |
| STYL | Style Designator: | Angle |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Semiconductor’s Certifications and Memberships
If You’d Ever Like to Get A Response to Your RFQ form for Aerospace Parts Within Fifteen Minutes Or Less, Simply Fill Out the form On Our Homepage.
Request for Quote
